1 x has been added to your basket

Free Delivery Roland TrueVis SG Series

Roland SOLJET Pro 4 XF-640 Specification

OVERVIEW & SUMMARY   |   FEATURES   |   SPECIFICATION



Model SOLJET PRO 4 XF-640
Printing Technology Piezoelectric inkjet
Media 
Width
Thickness
Roll outer diameter
Roll weight
Core diameter*1
259 to 1625 mm (10.2 to 64 in.)
Maximum 1.0 mm (39 mil) with liner, for printing
Maximum 210 mm (8.3 in.)
Maximum 50 kg (110 lb.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width*2 Maximum 1615 mm (63.6 in.)
Ink cartridges
Type
Colours
Roland ECO-SOL MAX ink
Four colours (cyan, magenta, yellow and black)
Printing resolution (dpi) Maximum 1440 dpi
Distance accuracy*3
Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Media heating system*4
Print heater and pre-heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F)
Connectivity
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function
Automatic sleep feature
Power requirements
AC 100 to 120 V ±10 %, 11 A, 50 / 60 Hz or AC 220 to 240 V ±10 %, 6 A, 50 / 60 Hz
Power consumption

During operation
Sleep mode
Approx. 1350 W
Approx. 20 W
Acoustic noise level

During operation
During standby
65 dB (A) or less
45 dB (A) or less
Dimensions (with stand)
2,750 (W) × 800 (D) × 1,275 (H) mm (108 (W) × 31 (D) × 50 (H) in.)
Weight (with stand)
177 kg (390 lb.)
Environmental

Power on

Power off
Temperature: 15 to 32℃ (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80%RH (non-condensing)
Temperature: 5 to 40℃ (41 to 104°F), humidity: 20 to 80%RH (non-condensing)
Accessories
Exclusive stands, power cord, media clamps, media holder, replacement blade for separating knife, software RIP, user's manual, etc

*1The length of printing or cutting is subject to the limitations of the program
*2 Media type: Media specified by Roland DG Corp. Temperature: 25°C (77°F), humidity:50%. Roll media must be loaded correctly. Applicable when all pinch rollers available to the media width are used. Side margins: 25 mm or more for both the left and right margins. Front margin: 35 mm or more. Excluding expansion/contraction of the media. Not assured when the print heater or dryer is used. All correction or adjustment function of this machine has been made properly.
*3 Print travel: 1m
*4 [PREFEED] menu item must be set to 'ENABLE' Range for assured repetition accuracy. For media with a width exceeding 610mm: length 4,000 mm. For media with a width of 610mm or less: Length 8,000 mm.
*5 Provided that media length is under 3,000 mm. Excludes the effects of slanted movement and of expansion and contraction of the media.
*6 Data size: 1,000 mm in the media-feed direction, 1,600 mm in the carriage movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded. During cutting, [PREFEED] menu item must be set to 'ENABLE'. Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*7 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, the preset temperature may fail to be reached.

Powered by Quantum VS ERP Solutions for Merchants & Distributors from EDP

Rosefox Paper & Printing Supplies