1 x has been added to your basket

Free Delivery Roland TrueVis SG Series

Roland TrueVis SG Series Specification

OVERVIEW & SUMMARY   |   FEATURES   |   SPECIFICATION



Model SG-540, SG-300
Printing Technology Piezoelectric inkjet
Media 
Width

Thickness

Roll outer diameter
Roll weight

Core diameter
SG-540: 210 to 1,371 mm (8.3 to 54 in.)
SG-300: 182 to 762 mm (7.2 to 30 in.)
Max. 1.0 mm (39 mil) with liner, for printing
Max. 0.4 mm (16 mil) with liner and 0.22 mm (9 mil) without liner, for cutting
Max. 210 mm (8.3 in.)
SG-540: Max. 30 kg (66 lb.)
SG-300: Max. 25 kg (55 lb.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width
SG-540: Max. 1,346 mm (53 in.)
SG-300: Max. 736 mm (29 in.)
Ink cartridges
Types and capacity
Colours and configurations
TrueVIS INK 500 cc pouch
Four colours (Cyan, Magenta, Yellow, Black)

Printing resolution (dpi) Max. 900 dpi
Cutting speed 10 to 300 mm/s (0.4 to 11.8 in/s)
Blade force 30 to 500 gf
Cutting blade Type: Roland CAMM-1 series blade
Blade offset: 0.000 to 1.500 mm (0.0 to 59.1 mil)
Software resolution (when cutting) 0.025 mm/step (0.98 mil/step)
Distance accuracy (when printing)*²*³ Error of less than ±0.3 % of distance travelled or ±0.3 mm (±11.8 mil), whichever is greater
Distance accuracy (when cutting)*³ Error of less than ±0.4 % of distance travelled or ±0.3 mm (±11.8 mil),
whichever is greater When distance correction has been performed
(when the setting for [CUTTING MENU] - [CALIBRATION] has been made): Error of less than ±0.2 % of distance travelled or ±0.1 mm (±3.9 mil), whichever is greater
Repeatability (when cutting)*³*⁴ ±0.1 mm (±3.9 mil) or less
Alignment accuracy for printing and cutting*³*⁵ ±0.5 mm (±19.7 mil) or less
Alignment accuracy for printing and cutting when reloading media*³*⁶ Error of less than ±0.5 % of distance travelled by media or ±3 mm (±0.2 in.), whichever is greater
Media heating system*⁷
Print heater
Dryer

30 to 45°C (86 to 113°F)
30 to 50°C (86 to 122°F)
Connectivity Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Power-saving function Automatic sleep feature
Power requirements
SG-540: AC 100 to 120 V ±10 %, 8.0 A, 50/60 Hz or
AC 220 to 240 V ±10 %, 4.0 A, 50/60 Hz
SG-300:AC 100 to 120 V ±10%, 5.4 A, 50/60 Hz or
AC 220 to 240 V ±10%, 2.7 A, 50/60 Hz
Power consumption:
During operation

Sleep Mode

SG-540: Approx. 1,050 W
SG-300: Approx. 710 W
Approx. 20 W
Acoustic noise level:
During operation

During operation: 64 dB (A) or less / During standby: 40 dB (A) or less
Dimensions (with stand)
SG-540: 2,685 (W) x 745 (D) x 1,310 (H) mm
(105.7 [W] x 29.3 [D] x 51.6 [H] in.)
SG-300: 2,070 (W) x 745 (D) x 1,310 (H) mm
(81.5 [W] x 29.3 [D] x 51.6 [H] in.)


1
The media holders of this machine are designed to be used exclusively with media that has a paper tube (core) with an inner diameter of 3 inches. To use 2-inch media, the optional media flanges are required.

*2
The length of printing or cutting is subject to the limitations of the program. *3・500 gf is the maximum instantaneous blade force. ・The blade force must be adjusted according to details such as the media thickness.

*4
Media type: Media specified by Roland DG Corporation.
Temperature: 25°C (77°F), humidity: 50 %
Roll media must be loaded correctly.
Applicable when all pinch rollers that can be used with the media width are used.
Side margins: 25 mm (1.0 in.) or more for both the left and right margins
Front margin: 35 mm (1.4 in.) or more
Excluding expansion/contraction of the media
Not guaranteed when the print heater or dryer is used.
Assumes all correction and adjustment functions of the machine have been used properly.

*5
Print travel: 1 m (39.4 in.)

*6
[PREFEED] menu item must be set to "ENABLE." Range for assured repetition accuracy
[54-inch model]
For media with a width exceeding 610 mm (24.0 in.): Length 4,000 mm (157.5 in.)
For media with a width of 610 mm (24.0 in.) or less: Length 8,000 mm (315.0 in.)
[30-inch model]
Length 4,000 mm (118.2 in.)

*7
Provided that the media feed length is 3,000 mm (118.1 in.) or less
Excludes the e­ects of slanted movement and of expansion and contraction of the media

*8
Data size:
[54-inch model] 1,000 mm (39.4 in.) in the media-feed direction, 1,346 mm (53.0 in.) in the carriage-movement direction
[30-inch model] 1,000 mm (39.4 in.) in the media-feed direction, 736 mm (29 in.) in the carriage-movement direction
No lamination
Automatic detection of crop marks at 4 points when media is reloaded
During cutting, [PREFEED] menu item must be set to "ENABLE."
Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.

*9
Warm-up is required after the power is turned on. This may require 5 to 20 minutes, depending on the operating environment.
Depending on the ambient temperature and the media width, the set temperature may not be reached.

For more detailed information, please refer to the user's manual.

Powered by Quantum VS ERP Solutions for Merchants & Distributors from EDP

Rosefox Paper & Printing Supplies