Roland VersaEXPRESS-640-8C Specification

OVERVIEW & SUMMARY   |   FEATURES   |   SPECIFICATION

Model	VersaEXPRESS RF-640 8 Colour
Printing Technology	Piezoelectric inkjet
Media
Width Thickness Roll outer diameter Roll weight Core diameter*1	259 to 1625 mm (10.2 to 64 in.) Maximum 1.0 mm (39 mil) with liner, for printing Maximum 210 mm (8.3 in.) Maximum 400 kg (88 lb.) 76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width*2	Maximum 1615 mm (63.6 in.)
Ink cartridges
Type Colours	ECO-SOL MAX 3 500 ml cartridges, INKU EGS 500 ml cartridges 8 colours (Cyan, Magenta, Yellow, Black, Light Black, Red, Green, Orange)
Printing resolution (dpi)	Maximum 1440 dpi
Distance accuracy*3	Error of less than ±0.3% of distance travelled, or ±0.3 mm, whichever is greater
Media heating system*4	Print heater and pre-heater, setting range for the preset temperature: 30 to 45°C (86 to 112°F) Dryer set temperature: 30 to 50°C (86 to 122°F)
Connectivity	Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function	Automatic sleep feature
Power requirements	AC 100 to 120 V ±10 %, 11 A, 50 / 60 Hz or AC 220 to 240 V ±10 %, 6 A, 50 / 60 Hz
Power consumption
During operation Sleep mode	Approx. 1070 W Approx. 20 W
Acoustic noise level
During operation During standby	62 dB (A) or less 49 dB (A) or less
Dimensions (with stand)	2575 (W) x 795 (D) x 1270 (H) mm (101.4 x 31.1 x 50 in.)
Weight (with stand)	140 kg (309 lb.)
Environmental
Power on Power off	Temperature: 15 to 32℃ (59 to 90°F) (20°C [68°F] or more recommended), humidity: 35 to 80%RH (non-condensing) Temperature: 5 to 40℃ (41 to 104°F), humidity: 20 to 80%RH (non-condensing)
Included Items	ErgoSoft Roland Edition 2 SPECIAL PLUS RIP Software, exclusive stands, power cable, media clamps, media holder, replacement blades for separation knife, User's Manual, etc.

*1 The media holder of this machine is exclusively for media with a paper tube (core) inner diameter 76.2 mm (3 in.). To use 50.8 mm (2 in.) media, the optional media flanges are required.
*2 The length of printing is subject to the limitations of the program.
*3 Media type: Media specified by Roland DG Corp. Temperature: 25°C (77°F), humidity: 50%. Roll media must be loaded correctly. Excluding expansion/contraction of the media. Not assured when the print heater or dryer is used. All corrections or adjustment function of this machine have been made properly. Print travel: 1 m.
*4 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and media width, the pre-set temperature may fail to be reached.
*5 Operating environment.
Specifications, designs and dimensions listed may be subject to change without notice.